Product Overview
1. One machine for two purposes, can hold two different liquids
2. Bubbles in 0.15 seconds, infrared induction bubbles, fast liquid flow rate, round body, multi-scene use
3. Double battery compartment design, long use time
4. Material: ABS+PC+PP+silicone
5. Capacity: 2x500mL
6. Application: hotels, toilets, schools, hospitals, shopping malls, etc.
7. Turn on: the blue light is on, reach under the sensor, when it is turned on, touch the switch button once, the ice blue light is on the first gear (many adult mode), touch the second switch button, the green light is on the second gear Gear (small number of children mode); touch the third time, the red light is on, and it is in shutdown mode. If you need to re-discharge, you need to reach out to the bottom of the sensor again
8. Induction distance: 2-10cm
9. Standby time: greater than or equal to 6 months
10. Working voltage: DC 6v
11. Working temperature: 3-75 degrees Celsius
12. Rated power: 3w
13. Power-on method: touch induction
14. Power supply mode: 8 AA batteries, 4 batteries in one group, 2 groups in total (the product does not include, you need to buy it yourself)
15. Note: The product only contains soap dispensers and does not contain hand sanitizer and other items
16. Packing list: infrared induction shampoo and shower gel machine, sticker label sleeve, packaging, manual, screw accessory kit, hanging board, non-marking double-sided tape
17. Size: about 102x225x79mm
18. Weight: 807g
Illustrate:
1. After the product is received, when adding liquid or refilling liquid when the liquid is used up, it needs to sense 2-3 times to empty the air before the liquid can be discharged normally.
2. When the voltage is so low that the indicator light is red. Prompt to replace the battery
3. When the product is not working, it will automatically enter the standby state without manual shutdown.
Precautions:
1. When the level of shampoo or shower gel is low, immediately replenish the corresponding liquid. When adding liquid, pay attention to the washing shampoo and the position of shower gel to avoid adding mistakes, otherwise the shampoo or shower gel will not be added. Will flow out normally.
2. Don't apply strong impact to the machine, otherwise it will cause serious damage.
3. If you do not use the machine for a long time, please turn off the power switch and remove the battery.
4. Please do not tilt the body to avoid leakage of shampoo or shower gel.
5. Do not wash the body with water, otherwise it will cause damage to the product.
Steps for usage:
1. Clean the surface to be pasted (if there is water to dry before pasting)
2. Tear off the super glue transparent release paper
3. When pasting, from top to bottom, and then gently press it.
4. Wait 12 hours after fixation, the effect is good
5. After tearing off the transparent film on the other side, stick the product and it can be used normally
Specification:
| Package Weight |
|
