Product Overview
Features
1. Specifically designed for DJI AIR 3, it fits the four legs brackets of AIR 3 and has a split tripod design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes, and will not open for obstacle avoidance.
2. Can effectively increase the distance between the drone and the ground by 25 mm. When AIR 3 takes off or lands on uneven ground, it can reduce the impact force, allow the drone to land smoothly, and protect the AIR 3s body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the DJI AIR 3 drone ability to adapt to the ground environment during takeoff and landing.
3. Adopting a split quick-release design, the battery can be quickly replaced without disassembly, and does not affect the folding of the drone arms. You only need to disassemble the heightening tripods on the two rear tripods to store them in the original bag, STARTRC special bag, and commercially available bags. In most bags, the other two disassembled tripods are also small and easy to carry.
4. Lightweight design. The entire landing gear weighs 32g. The lightweight design will not add extra burden to the flight of AIR 3, and it will not shake or fall off during flight.
5. Note: It cannot be used with propeller protection; the aircraft cannot be put into a waterproof box or other storage equipment without removing the rear tripod.
Specifications
1. Material: ABS
2. Dimensions: Front leg: 86x49x29mm; Rear leg: 58x48x29mm
3. Weight: 32g
Package List
1. Left front leg stand x 1
2. Left rear leg stand x 1
3. Right front leg stand x 1
4. Right rear leg stand x 1
5. Instruction manual x 1
1. Specifically designed for DJI AIR 3, it fits the four legs brackets of AIR 3 and has a split tripod design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes, and will not open for obstacle avoidance.
2. Can effectively increase the distance between the drone and the ground by 25 mm. When AIR 3 takes off or lands on uneven ground, it can reduce the impact force, allow the drone to land smoothly, and protect the AIR 3s body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the DJI AIR 3 drone ability to adapt to the ground environment during takeoff and landing.
3. Adopting a split quick-release design, the battery can be quickly replaced without disassembly, and does not affect the folding of the drone arms. You only need to disassemble the heightening tripods on the two rear tripods to store them in the original bag, STARTRC special bag, and commercially available bags. In most bags, the other two disassembled tripods are also small and easy to carry.
4. Lightweight design. The entire landing gear weighs 32g. The lightweight design will not add extra burden to the flight of AIR 3, and it will not shake or fall off during flight.
5. Note: It cannot be used with propeller protection; the aircraft cannot be put into a waterproof box or other storage equipment without removing the rear tripod.
Specifications
1. Material: ABS
2. Dimensions: Front leg: 86x49x29mm; Rear leg: 58x48x29mm
3. Weight: 32g
Package List
1. Left front leg stand x 1
2. Left rear leg stand x 1
3. Right front leg stand x 1
4. Right rear leg stand x 1
5. Instruction manual x 1
Specification:
| General |
|
| Package Weight |
|
